TEL:86 571 63738146  86 571 63738148

Copyright ©  Hangzhou FeiYan fluo Plastic Products Co., Ltd.       Powered by www.300.cn                                                                            编号:浙ICP备05030281号        

PRODUCTS

>
TECHNICAL DATA

TECHNICAL DATA

Page view:
PTFE Thread seal tape
Main technical indexes:
Heat resistance:+370℃
Cold resistance:-190℃
Pressure resistance: up to 30bars
Tensile strength:8N/mm2
Percentage elongation:≥25%
Identity:insulation,corrosion resistance anti-anging

Tensile Strength 10 Mpa (1500ps)min
Elongation 50%min
pH range 1-14
Lubricant conten<0.1%

Industrial usage:
Civil-construction, machinery,chemicals,and space navigation,especially in drainage systems.

Characteristics:
Insulation,acid-resistance and corrosion resistance,using in oxidizing agent for a long period.

 

HOW TO USE IT?
Instructions
When you are joining threaded pipe to use for gas or water lines,you must use something to seal the joint so it doesn’t leak. The best thing to use is Teflon tape on the male threads and pipe-joint compound on the female threads.The 1/2-inch-wide tape is the best choice for most piping,while 3/4-inch tape is better for 3 and 4-inch piping.What’s the right way to put the tape on the pipe threads?

Step1
Pull some tape off the roll and place the end on the male pipe threads.

Step2
Wrap 3-5 layers of tape tightly in a clockwise direction around all the threads.Cut the end with your scissors.

Step3
Apply a thin coat of pipe-joint compound to the female threads in the fitting and screw the pipe into the fitting.

DIRECTORY